Crescent, Hydroslide, Barn Style, and Serenity. This kind of shower enclosure is referred to as a barn shower door enclosure. Unusual barn style with hardware and little frame, a fixed panel, a sliding glass panel, and both. This is a great addition to the majority of inline bathroom openings and comes with hardware and 3/8″ clear glass or low iron glass. You may use this kind of shower door with either a tub or a shower stall. These enclosures are provided and installed by Glass Governor of Atlanta and include glass, hardware, and expert installation.
Serenity Barn Shower Door Enclosures
Compared to conventional sliding shower door systems, the Serenity Series Sliding Door System has a completely distinct appearance. The container appears to be floating almost due to the use of minimal hardware that creates a frameless appearance. Specially created roller bearings make it possible for the door to open and close quietly and simply.Above the header bar that spans the top of the container, this special roller mechanism operates.
The 180 Degree Standard Kit is made up of one sliding panel and one fixed panel. With the exception of the 90 Degree Accessory Kit, which must be ordered separately.
The robust polished or brushed stainless steel pieces may accommodate tempered glass that is 10 mm thick and 3/8″ thick.
Specifications:
Glass Thickness: 8 or 10 mm, 3/8″ Modest Safety Glass is made entirely of stainless steel.
Maximum Door Size: Do Not Exceed 88 Pounds (40 kg) or 30″ (762 mm) Wide
Holes must be fabricated in the door and the fixed panel.
Crescent Barn Shower Door Enclosures
The Crescent Series includes these. A beautiful solution for the shower of your dreams is presented by the simple construction of a single rail. For both 3/8 and 1/2 inch glass applications, polished and brushed stainless steel has been precisely manufactured. The 1000 Series is another name for this shower door.
Your choice of back-to-back handle is included as standard. Available in Oil-Rubbed Bronze, Brushed Stainless Steel, and Polished Stainless Steel.
– Applications for 3/8″ and 1/2″ glass up to a 37″ wide door and 110 lbs.
– Towel bar, pull handle, or circular recessed handle (Cut to fit, pre-drilled, with adjustable inserts (barrel nut)
– Available up to 240″ running rail
– Available SealPro Glass Sealant
Hydroslide Barn Shower Door Enclosures
The Hydroslide Sliding Shower Door Kits were made to fit over bathtubs or in full-standing showers. A wide variety of shower designs with fixed glass panels on either end or both sides at 90 or 180 degrees can be accommodated by the Hydroslide System.
A sliding door and floor-to-near-ceiling glass panels are also an option with the Hydroslide System. The most recent European “all-glass” design is used in Hydroslide Sliding Shower Door Kits.
Kits come in widths of either 84″ (2.13 m) or 60″ (1.52 m). As long as the sliding door glass weighs less than 88 pounds (40 kg), installers can reduce the width to the desired size, and the height is optional.
The 180 Degree Standard Kit is all that is needed for the installation of the 180 Degree Wall-to-Wall installation.
The 180 Degree Standard Kit and the 90 Degree Wall to Glass Accessory Kit are needed for the 90 Degree Wall-to-Glass Installation. On the next page, you can also order individual or replacement parts.
Four finishes are offered for Hydroslide Kits:
Oil-rubbed bronze with oil-rubbed bronze anodized sliding track polished brass with a brite gold anodized sliding track chrome fittings with chrome fittings anodized sliding track
Essence Barn Shower Door Enclosures
Our NEW Essence Series has a bottom rolling system with an anti-derail/anti-pinch guard feature to provide a headerless appearance.
For the door to vertical jamb alignment, the bottom rollers additionally have an inbuilt height adjustment. A frameless vertical and horizontal appearance is attained by being entirely header-free.
The foundation of this bottom rolling unit is the door’s silent and seamless operation. The bottom track at the sill and a clear L-shaped jamb with a soft seal/bumper used vertically allow for good water management at the same time.
New configurations are possible with your separate addition of a free-standing shower head and valves, including lovely island designs, U-shaped designs, and L-shaped designs with atypically placed plumbing walls.
Use of the Essence Series Frameless Sliding Shower Door System requires tempered safety glass that is at least 1/2″ (12 mm) thick. It is available with either rounded or square corner rollers and is sold in four popular finishes.
The user just orders the required Brackets, Handle, or Knob separately to complete the installation because the Basic Kit is sold in a way that allows for both 180-degree and 90-degree installations.
Contact Glass Governor of Atlanta
Need a FAST Quote for your Shower Glass Project? Check out our new Online FAST Quote feature. Submit FAST Quote request now >
Glass Governor of Atlanta
Atlanta Barn Shower Doors
1395 South Marietta Pkwy SE
Bldg 100, Suite 104
Marietta, GA 30067